Drilling gears UNI2-07-00-10H7

The drilling gears of the UNI2 series can be manufactured with spindle distances from 20 mm. The gears can produce holes with a diameter of up to 32mm with a speed range from 645 to 10,000 1/min in continuous operation. The maximum transferable capacity is 3.2 kW. Spindle speed and drill pattern can be selected freely, the drilling gears are available for all standard hinges.

 

During the construction was attempted to keep the speed gap between the spindles as low as possible. If possible the drive speed is transmitted in a ratio of 1:1. At different spindle distances within a drilling gear it is often necessary to vary the speeds of the individual spindles because of different gears.