2D- Tracing spindles FN10-1.1-F

The 2D-Tracing spindle FN10 is used for rounding, chamfering or milling of workpiece edges. It sampled at the same time from the top and front face of the workpiece and works with a spring suspended stroke, each 10 mm in horizontal and vertical direction. Unevenness in the material can be equalized thereby. The sensing device is made with adjustable sliders on the workpiece surface and conforms to the tolerances due to a spring suspended stroke. As a result the processing is always in the same distance to the surface of the workpiece.

For different materials, it is necessary to adjust the tracing force. At the FN 10 this can easily be changed steplessly with adjustment screws by the user.  Depending on surface characteristics of the workpiece either sliding pieces of polyamide or hard chrome plated steel can be used. The maximum speed is 14,000 1/min.