Drilling spindle units TBE24
SKU: 099419
The drilling spindle unit series TBE24 are designed for the use in CNC machines and offer the possibility to arrange more than 2 rows in a distance ≥ 32mm. Almost all drill patterns can be realized to customer specification. The units are driven by toothed belts, all the spindles are turning right. The vertical drilling spindles can be combined with horizontal and vertical drilling gears with drilling distances ≥ 16mm. Each single spindle can be submitted 50mm; units with longer stroke are available on request. The drilling feed itself must be provided by the feed of the machine. Depending on customer request the drilling spindle units are formed different, the minimal spindle distance is 32mm.
In the development was considered that a modular system was created which allows the flexible combination of different cases with the available spindle types. Moreover, by the design concept an easy, cost-effective maintenance and repair is ensured.
Magnetic valves
The single row drilling units of the series TBE24 can be added with magnetic valves. The magnetic valves are mounted on the back plate at each cylinder.
The plates are connected by air ducts. The advantage is that the main air must be supplied only once.
Screw mounting surfaces and mounting holes
At gear units of the series TBE24 screw holes can be installed on all housing sides which are not provided with air connections. When we are configuring your controlled drilling units, you get a quotation and drawings with relevant proposals.
Spindle assembly and housing designs
Depending on customer requirements, the housing of the controllable drilling spindle units type TBE24 can be formed in various shapes. The standard form is a single row of Drilling spindle unit (R-form). The following table below shows possible designs of the series TBE24.
With the controllable drilling spindle units many customer specific drilling patterns and spindle combinations can be realized. Here only the housings are dimensionally modified according to the specifications in its outside dimensions. In any case, the height measurements and the internal structure of the housing are GROTEFELD standard.
The request for larger than 50 mm strokes changes also the outside measurements. Please ask for suitable units.
Drive
The drive consists of one or if necessary more three-phase a.c. flatmotors with a maximum of 2.8 kW. The drive power is transmitted through a coupling over a toothed belt drive to the spindles. The required drive power is part of the configuration of the drilling unit calculated by us and proposed to you. The location of the drive motors are defined by us according to technical conditions, if you no special requests are mentioned.
Spindle types
As spindles vertical spindles, horizontal spindles, grooving saws and vertical drilling gears (min. centre distance 16 mm) can be used. All spindle types can be combined in consideration of the spatial conditions.
Tabs
